Some Tips for Using EPS Granulator
EPS granulator is an important machine for making EPS granules. Some problems may be encountered during the use. We will introduce how to make high-quality EPS particles.
How to control the temperature when the EPS granulator is running?
When the EPS granulator is started, the temperature of the upper screw can be set at about 200 ℃. The lower screw temperature can be set at about 160 ℃. This is to adjust the temperature according to the extruded materials when producing dry materials. Second, frequently change the filter screen. This can ensure the quality and transparency of particles.
The filter screen of the EPS pelletizer can be selected between 40-100 meshes according to the product quality requirements. The higher the mesh number of the filter screen, the cleaner the impurities are filtered.
Controlling the temperature of cooling water can ensure that the cut particles have a certain temperature to evaporate the water on the particle surface.
How to produce high-quality EPS particles?
- It is a basic condition to purchase a qualified EPS pelletizing machine
- The second is the impact of production environment.
- It is also important to use correct operation methods. The reasons for poor grain quality and uneven discharge shall be clarified.
- The voltage shall be stable. When the EPS granulator works, electricity will be used to drive the operation of the machine. If the voltage is unstable, the speed and force of the machine will change. When the voltage is stable, the cutting and discharging of eps particles are uniform. But when the voltage is unstable, it will become irregular. This will lead to uneven discharge particles.
